Laser Materials Library · Slate
Slate Designer
Color a design: upload a silhouette, pick colors from the slate tests, and click the parts you want in each. Or make a test pattern: pick the shades you want to try and download a LightBurn file with a labelled square for each. The preview shows roughly how it will come out.
It all runs in your browser. Your image never leaves this page.
Pick the shades to test
Choose a color on the right, then click its shades to add them. Each becomes a square with its settings engraved underneath, ready to run from LightBurn.
Drop a silhouette here
A black-and-white image works best: PNG, JPG, WebP or SVG.
Colors
Pick a color, then a shade, then click areas of the design. Order the shades by color or by speed to find the fastest. Settings that melt slate aren't offered.
Test pattern
Click shades above to add or remove them. Up to 29: LightBurn allows 30 layers, and the labels use one.
Fill everything at once
Reading the image
Changing these starts the coloring over.
Layer plan
One LightBurn layer per color, with that row's settings and a 100 mm lens, like the tests. Time is a rough figure per square centimetre (speed × interval, ignoring jumps between lines); area is the share of the whole image.
| Color | Finish | Power | Speed | Frequency | Q-pulse | Interval | Passes | Time | From | Area |
|---|---|---|---|---|---|---|---|---|---|---|
| Upload an image to start. | ||||||||||