I also believe in having multiple armies for your game.. I have two 40k armies; Tau and Orks.  I like them both and am not really looking to change them..   But right now I only really have one fantasy army;  Skaven.  I love my rats, but I want to find another army to play and have been looking for a while..  I tried Ogre’s and I tried Tomb Kings but really didn’t get into them.  I have a lot of TK stuff painted up and I very much like the models and the lore, but for whatever reason the TK army just doesn’t excite me..  The Ogre’s never even got that far..

So I’m back on the hunt and I think I have settled on getting a Daemons of Chaos list going.

I think all of the models are pretty neat, and I like that that its sorta 4 armies in one; one list for each god.  Something that also appeals on a lesser level is the fact that they are the exact same models used in Fantasy and 40k.. So if you have them ready to go in Fantasy, its easy to use them in 40k.  (Just have to solve the bases problem which I’ll get to in a moment.. )

My number one reason for picking this army is because I dig the models.  I am most likely going to go an all Slaanesh army, or if that’s not viable I’ll fill in with Nurgle or Khorne..   I’m going to leave Tzeentch out because it seems it’s what ever one is doing and I like doing things others aren’t..

I really look forward to painting these guys (gals?) up.. I think the Slaanesh models all look pretty cool and should be quite fun to paint.. I know I wont get anywhere near as good results as the professional painters do, but still they look good and should come out okay..

The only issue at this point is that the new core rule book is coming out in July and is rumored to nurf the Daemons down something harsh..  If the current rumors hold true then the DoC army as a whole may be unplayable.. I find that unfortunate, but not enough to dissuade me from getting the army in the first place..

I have also heard tell that half the reason for the new rule book is to correct issues in the DoC army and a couple other newer armies that introduced issues into the game.. It’s really too bad they feel the need to completely rewrite the main rules, instead of just fixing the issue with the individual army..

Fantasy and 40k approved!

The Bases:  So, I listed above that these models can be used in both fantasy and 40k.. that’s pretty cool.. The only issue is that fantasy uses square bases, and 40k uses round bases.  That issue can be complicated further by the fact that 40k bases are one inch in diameter, and fantasy bases are typically 20mm or 25mm square..  So, if you want to use the same models in both games (as opposed to buying the same models twice.. ) then you have to get clever about your bases..

I solved it this way;

1.  I got some washers that are smaller around than both the 40k bases and the fantasy bases you’re going to use.  With the Daemonettes I was in luck, they use  25mm bases so I could get a slightly larger washer than if I was stuck with 20mm bases.  Also make sure the washers have as small a center hole as possible.  The washers I’m using are 7/8 (0.87″) with a 7/32 (0.20″) inner hole, got them at Lowes for $3 or $4 for a hand full..

2. I then assembled the model as I wanted it and glued it to the top of one of the washers — trying very hard not to foul the hole in the washer.

3. I then drilled 4 itty bitty holes in the base and stuck in some of the tiny magnets I have.   I mean it these things are small.. 0.05″ is small man..  4 of them hold the washer down nicely, and are small enough to not cause clustering.. (Where a bunch of magnets jump to one another.. )  Drill all the way through the base with a drill bit slightly smaller than the magnet, and then enlarge it a bit by in and out movements..  This is a tiny hobby drill bit.. Once that’s done, I glued the magnets in from the underside so they wont go anywhere.

4. I then got a dowel from Walmarts hobby area that was the exact fit for the washers..  You can get a bag of like 20 of them for $0.89..   I drilled a whole in the direct center of the base and pushed the dowel through.. I had to be very careful not to split the base.. And I made sure to push the down through the hole a bit so that it touches the table the same time the edges of the base does.  It helps with gluing later.

5.  I then took the thinnest washer I had ( they are varying thicknesses for some odd reason ) and slid it down the dowel until to stuck to the magnets..  Put the dowel in a vice, and used a coping saw to cut the dowel at the washer.  Once that was done I applied glue to the underside, again ensuring that nothing goes anywhere.

6.  And that’s it..  Paint and flock it up.. When you flock the square base you want to make sure that you use an extra washer because it gets kinda nasty.. And when it dries you might have to do some minor surgery to get that washer off.. I had to carefully Xacto around the edges to free it from its flocky jail..

Click the image to see the results.. it works out nicely..  The 40k round bases snaps up in there and only requires a touch of flocking on the top of the dowel.. the fantasy base you see snaps down nicely too almost 100% hiding the washer..

Skaven

I have been a Skaven player since the early 1990′s.  They were the second fantasy army I got into after Orcs & Goblins.  Once I found the blessing of the horned rat however, my love of all things green didn’t last very long..   The Skaven were here to stay!  I love these little guys.. Primarily because back then they were as damaging and deadly to themselves as they were to anyone else..

Later revisions of the Skaven codex very much removed a good portion of the wild and whacky from the army entirely and they sort of became boring.. I stuck with them through all these years but eventually ventured into Tomb Kings just to try something new..  Well with the new Skaven, I’m back baby..

And my opponents are doomed!

Or, well I might be doomed.. It all depends on the dice I suppose..   Either way it promises to be fun!

I really like where they are going with the army.. I mean I know the army is bound to be more powerful than the current armies are simply because it’s the latest army..   That’s just the way of things.. Games Workshop is a company in the business to make money and the way to do that is to make the lastest revision just a smidge better than previous ones so folks will flock to it.. But having said that, I like that they army is back to being quite self destructive..

New Doomwheel

Firstly, they have added the doomwheel back to the roster.. Something they completely omitted from the last book entirely.. Not only did they bring it back in the new book but they released a new model for it and its great!

I still have my old doomwheel model on the shelf where its sat for the last 10 years or so not getting played.. and when I read that the new book would have a doomwheel I blew off the dust getting it ready for play..  Then I saw the new model.. Holy crap.. Yeah okay.. back on the shelf you go.. I’m getting the new on and painting it.. (See image)

Plus it’s all plastic!  Yay!

I remember the day when the metal models were all way more detailed than anything they could come up with in plastic, but those days are long gone.. Give me plastic all the way..  Well it appears GW has heard our pleas and is intending to release all new models for the Skaven..   They have already put out a number of them, with a few more in the wings to come out.

Plus the codex has a bunch of new units that they will have to produce models for sooner or later so I expect even more..

Stormvermin Before and After

The new stormvermin plastic kit is fantastic.. Gone are the days of having to purchase a buttload of individually packed blisters at$15 each just to have a 20 model unit.. The new stormvermin box comes with everything you need to have a fully functional unit of 20 models..

They paint up nicely and the dip method works perfectly on Skaven.  Click the before and after picture to see what I’m talking about.  That model was painted in about 15 minutes.. I did what I can only call a slap/dash job of painting him with basic colors and then performed the magical “dip” at which point he came out looking great.

Add to the mix the WAY over the top new characters and warmachines and you have one powerful army..  I look forward to building a force to play with..  The only down side is it looks like I will have to repurpose all my old models as they aren’t what I would build now..  The up side is, I now have more slaves than I know what to do with..